Mostrar el registro sencillo del ítem

Acoustic behaviour of plates made of different materials for measurements with the microphone flush mounted

dc.contributor.authorMontes Gonzalez D.
dc.contributor.authorBarrigón Morillas J.M.
dc.contributor.authorRey Gozalo G.
dc.date.accessioned2020-09-02T22:23:33Z
dc.date.available2020-09-02T22:23:33Z
dc.date.issued2018
dc.identifier10.1016/j.apacoust.2017.11.011
dc.identifier.citation132, , 135-141
dc.identifier.issn0003682X
dc.identifier.urihttps://hdl.handle.net/20.500.12728/5394
dc.descriptionDifferent possibilities for the location of the microphone are provided when it is desired to determine the sound levels outdoors. With regard to this topic, the ISO 1996-2 standard proposes a series of corrections depending on the distance to the façade of the buildings to evaluate the incident sound field, thus correcting the effect of reflections. In this regard, in the case of the microphone located on a reflecting surface, the standard establishes two options: on the one hand, to place the microphone directly on the façade, and on the other hand, to use a plate on the surface. This work shows a comparative study of the acoustic behaviour of two plates with identical geometries through in situ measurements, both in broadband and frequency bands. One of them is made of aluminium, following the explicit recommendation of the ISO 1996-2 standard. The other plate is made of methacrylate to look for a less dense material and, consequently, to obtain a plate that is more easily transportable. Different measurement conditions have been considered to evaluate the differences and similarities between the two plates. The results obtained in different measurement configurations show an equivalent acoustic behaviour of both plates. Consequently, the alternative use of a methacrylate plate instead of an aluminium plate could be considered adequate according to the indications of the ISO 1996-2 standard. © 2017 The Authors
dc.language.isoen
dc.publisherElsevier Ltd
dc.subjectBacking board
dc.subjectFaçade
dc.subjectISO 11819-4
dc.subjectISO 1996
dc.subjectMeasurement configurations
dc.subjectAcoustic fields
dc.subjectAcoustics
dc.subjectAluminum
dc.subjectArchitectural acoustics
dc.subjectFrequency bands
dc.subjectBacking board
dc.subjectComparative studies
dc.subjectIn-situ measurement
dc.subjectISO 11819-4
dc.subjectISO 1996
dc.subjectMeasurement conditions
dc.subjectMeasurement configuration
dc.subjectReflecting surface
dc.subjectMicrophones
dc.titleAcoustic behaviour of plates made of different materials for measurements with the microphone flush mounted
dc.typeArticle


Ficheros en el ítem

Thumbnail
Nombre:
item_2-s2.0-85034956083.pdf
Tamaño:
2.750Kb
Formato:
PDF
Ver/

Este ítem aparece en la(s) siguiente(s) colección(ones)

Mostrar el registro sencillo del ítem